PA300: Eindversterker 100W

Specification

Rated Output Power (Continuous, 25℃)

100WRMS (4Ω/8Ω)

Peak Output Power1, 3

295WRMS (4Ω), 130WRMS (8Ω);(1kHz, THD+N≤1%. short duration: duty cycle 1/5, on time 60s. supply by 230VAC/50Hz)

Maximum Output Voltage

49VPeak (4Ω), 46VPeak (8Ω)

Maximum Output Current

12ARMS or 20APeak

Minimum Load

2.5Ω

Maximum Capacitive Loading

220nF

Output Impedance2 (Typ.)

0.013Ω (1kHz);<0.8Ω (20Hz~20kHz)

Output Idle Noise3, 4 (Typ.)

22Hz~20kHz, Gain=0dB:332uVRMS (4Ω), 331uVRMS (8Ω);A-weighting, Gain=0dB:261uVRMS (4Ω), 262uVRMS (8Ω)

Frequency Response3 (Typ.)

20Hz~20kHz, 1W:+0.05dB~-0.1dB (4Ω), +0dB~-0.25dB (8Ω);20Hz~20kHz, 80% peak power:+0.05dB~-0.15dB (4Ω), +0dB~-0.25dB (8Ω)

Dynamic Range3 (Typ.)

22Hz~20kHz, 1kHz:100.3dB (4Ω), 99.8dB (8Ω);A-weighting, 1kHz:102.4dB (4Ω), 101.8dB (8Ω)

THD+N3 (Typ.)

1kHz, 1WRMS:0.018% (4Ω), 0.019% (8Ω);1kHz, 100% peak power:≤1% (4Ω), ≤1% (8Ω)

Output Drive Mode

BTL

Output Connector

speakON socket and 4mm banana socket

Maximum Input Voltage (Input Sensitivity)

1.0VRMS

Input Impedance (Typ.)

≥39kΩ (20Hz~20kHz)

Input Connector

XLR (Balanced) and BNC (Unbalanced)

Volume Control (Input Attenuator)

-∞~0dB

Switching Frequency Range (Amplifier)

100kHz~500kHz

Total Power Efficiency

73%~80% (50WRMS~300WRMS)

Limiter and Overload Indicator

Built-in voltage limiter with clip indicator on when maximum output amplitude is reached.

Output Level Indicator

7-step LED indicator: -30dB~-1.5dB

Protection

Thermal, over-current, short-circuit, DC-offset and high-frequency protection.

Cooling

Fan forced cooling.Fan forced cooling

Power Supply

100~240VAC 50/60Hz, IEC Type C13 Connector

Operation Environment

-10℃~50℃, 0%RH~95%RH

Dimensions (mm)

W238 x H90 x D248

Shipping Case Dimension (mm)

W428 x H153 x D350

Weight

2.2kg (power amplifier only)

Note 1:

Contact manufacturer for the peak output power operating time of other supply voltage.

Note 2:

Measured directly at the terminals on the PCB.

Note 3:

Measured by AUX-0025 filter and dScope Series III analyzer with AES17 20kHz filter.

Note 4:

Measured by connected a 600Ω external terminal at input.